|
|
|
|
|
Construction
- Tile Blades |
|
|
|
Porcelain Tile |
| |
|
|
|
Description:
• SLICER TILE - Dry
• Continuous rim
• Porcelain, ceramic
• 7mm Segment Height 3.5" -
8"
• 10mm Segment Height 10" +
• Wet or Dry Use |
Available Sizes:
3.5", 4", 4.5", 5", 6", 7",
8", 10", 12" |
|
|
|
|
| |
| |
|
|
|
Description:
• SLICER TILE - J-Slot
• Continuous rim
• J shaped etching for
cooling
• Porcelain, ceramic
• 7mm Segment Height 3.5" -
8"
• 10mm Segment Height 10" +
• Wet Use |
Available Sizes:
4", 5", 6", 7", 8", 10", 12" |
|
|
|
|
| |
| |
|
|
|
Description:
• SLICER TILE - Dogger
• Continuous rim
• Hot dog shaped etching for
cooling
• Porcelain, ceramic
• 7mm Segment Height
• Wet Use |
Available Sizes:
4", 4.5", 5", 7" |
|
|
|
|
| |
|
Granite / Quartz Tile
Marble Tile |
| |
|
|
|
Description:
• Blueline-Pro All Cut Blade
• Cuts all types of
materials
• Asphalt, Green Concrete,
Block, Concrete, Hard
Concrete, Pavers, Brick,
Clay Pavers, Hard Brick,
Refectory Brick, Filed
Stone, Marble, Granite,
Ductile Iron Pipe
• Laser Welded
• Segment Height 10mm
• Alternation Segments
• Undercut Protection
• Cooling Holes
• Drive Pin Hole
• Slant U Gullet
• Dry/Wet Use |
Available Sizes:
12", 14" |
|
|
|
|
| |
| |
|
|
|
Description:
• TRICUT - all purpose blade
• Specially designed for all
materials
• Drop segments for core
protection
• Available in 12” & 14
• Good for cutting concrete,
asphalt and stone
• Very good all around blade
for most materials |
Available Sizes:
12" , 14" |
|
|
|
|
| |
|
Mixed
Use
Porcelain / Marble / Granite / Quartz Tile |
| |
|
|
|
Description:
• SLICER TILE - Thin
• Super thin to cut
Porcelain, ceramic
• Can be used for Granite
and Marble
• 10mm Segment Height
• Wet Use |
Available Sizes:
4", 4.5", 5", 7", 8", 10" |
|
|
|
|
| |
| |
|
|
|
Description:
• SLICER TILE - Thin-R
• Super thin to cut
Porcelain, ceramic
• Can be used for Granite
and Marble
• Reinforced core for extra
strength
• 10mm Segment Height
• Wet Use |
Available Sizes:
7", 8", 10" |
|
|
|
|
| |
|
Glass
Blades |
| |
|
Glass Blades |
|
 |
|
|
Description:
• Glass Blades
• Engineered to Cut Glass
• Made in Korea
• 7mm Segment Height
• Wet Use |
Available Sizes:
7", 8", 10" |
|
|
|
|
| |
|
|
| |
|
Recommendations of Use
1. Ensure that the blade used is suitable
for the material being cut.
2. The blade should always be mounted with
the rotation arrow pointed in the correct
direction.
3. Ensure that the bore diameter (arbor) of
the blade is of the same size as the machine
spindle. Never enlarge the bore
(arbor).
4. Special attention should be made to
ensure that the blade flanges are both clean
and of the same diameter.
5. Observe the working site safety
regulations. It is of the highest
importance that the blade guard is always
correctly fitted and used.
6. To ensure long blade life, avoid brutal
or sharp contact with the material to be
cut.
7. Avoid excessive cutting pressure which
could jam the blade in the material.
8. When using a straight cutting blade on
hand-held machines, maintain a straight
cutting plane avoiding load or twist.
9. When using the blade for extensive
periods, the high generation of heat can
cause a vibration of the blade. To
assist cooling, simply run the blade out of
the material for several seconds and then
continue cutting. |
| |
| |
| |
|
|
|
|
|
|
